GTX Gen II compressor wheels were designed using proprietary Honeywell computer simulation technology focusing on CFD analysis to optimize the wheel design to reach maximum efficiency and mass flow for each turbocharger. Each GTX Gen II turbocharger has the ability to create more air mass flow, offering enthusiasts a wider range of power output when tuning the vehicle. The 8mm dual ceramic ball bearing cartridge provides optimal turbo response and reliability through its reduction in shaft motion.

The Gen II GTX Series Turbochargers feature a fully-machined compressor inlet, fully-machined compressor outlet, and fully-machined ported shroud.

 

 

Gen II compressor housings are not interchangeable with Gen I compressor wheels; however, all Gen II turbochargers are outline interchangeable with the equivalent GT and GTX Gen I products making a turbo swap easy to perform using all existing piping.


The new compressor housings are equipped with a fully machined speed sensor port that accepts the Honeywell Garrett speed sensor (Sold separately). This feature allows tuners to understand existing operating conditions, which is important when fine tuning a turbocharger to its most efficient operating conditions. The speed sensor port comes plugged from the factory and can be removed using a 5mm allen key when ready to install a speed sensor kit.

 

Part #: grt856801-5051S

 

 

Garrett GTX3576R Gen II Turbo Assembly Kit T4 / V-Band 0.63 A/R

  • 1 x grt740902-0018 Garrett GT35R Turbine Hsg Kit O/V T4 / V-Band 0.63 A/R (Hi Sil)
  • 1 x grt851154-5003S Garrett GTX3576R Gen II Super Core (Replaces 836047-5001S)

 

For inquiries on other turbo options contact us at Sales@Rampagefab.com

 

*picture is for refernce only

GARRETT GTX 3576R

$2,333.00Price
A/R
INLET
OUTLET
  • Our return policy states that if an order is cancelled after payment was made that the buyer will pay up to a 20% restocking fee even if Rampage Fab has not shipped your product.  Rampage Fab may assess a larger fee if purchase of material was made to build your product. Buyer is responsible for return shipping. 

     

    We guarantee our products 100%.  If you are not completely satisfied, please contact us at sales@rampagefab.com to discuss.

  • This is a RACE ONLY Product manufactured and sold for installation on vehicles to be used solely for competition purposes, which, once installed, may never be used, or registered or licensed for use upon a public road or highway. If you install this part on your vehicle and use the vehicle on a public road or highway, you will be considered in violation of the Clean Air Act and personally subject to a civil penalty.